How To Install The Simplisafe Doorbell

Thinking about ordering SimpliSafe? Maybe your new SimpliSafe system just arrived and yous're wondering how to get started. Either mode, we think you'll find loads of great information in this easily-on SimpliSafe installation guide.

We've spent lots of fourth dimension (nearly 100 hours!) testing and reviewing this popular home security system. It actually ranks #1 on our 'Peak 10 Best' list. And guess what, ease-of-installation was a large function of that.

SimpliSafe Package

Our SimpliSafe Equipment – Before Installation

But nosotros empathise that installing new applied science can exist intimidating (even downright scary). Not SimpliSafe! The word 'simple' is in the proper noun. Even if you lot've been burnt by DIY projects in the past — with parts and pieces nonetheless strewn about your house — nosotros don't think you lot'll accept problem getting SimpliSafe working for you lot.

Nosotros're going to take you step-by-stride through our feel setting up SimpliSafe. Whether you lot have your center on a SimpliSafe package, or information technology's already on gild… or even if the kit is already sitting on your kitchen table, staring at you and taunting yous… this one's for you.

SimpliSafe Installation Overview

Production	Blazon of Product	Installation Difficulty	Fourth dimension to Install
SimpliSafe Hub	Base Station	Piece of cake	1 minute
SimpliSafe Keypad	Control Panel	Easy	ane infinitesimal
SimpliSafe Intrusion Sensors	Entry Sensors	Easy	ten minutes
SimpliSafe Water Sensor	Environmental Sensor	Like shooting fish in a barrel	one minute
SimpliCam	Security Photographic camera	Moderate	5-10 minutes
SimpliSafe Video Doorbell Pro	Doorbell Camera	Moderate	15-xx minutes

Let's Dive into the SimpliSafe Installation Process

First things first: take stock. Nosotros highly recommend unboxing your organization and laying the individual components on a clean, apartment service. Nosotros've constitute that this uncomplicated step makes all the divergence in the globe.

Base Station and Wireless Keypad Setup

In the box y'all'll find a picayune card that tells you to plug in the base station. But don't simply plug it in anywhere, endeavor to identify it primal in your house, as it has a built-in siren that must reach into every nook and cranny of your home. Nosotros put ours near our entryway.

When your base station powers on, a blue calorie-free will emit from the bottom of the unit. You'll hear a soothing female person phonation say "Welcome to SimpliSafe." If you read our in-depth SimpliSafe review, you'll know that the voice nearly transported us into a dream-like state.

You lot'll then turn on the wireless keypad, which will automatically link to the hub. If we're being honest, we didn't love the push-button keypad, but thankfully SimpliSafe's Interactive plan likewise comes with app-based controls. So we ended up using our iPhone to manage the system 95% of the fourth dimension. If a touchscreen keypad is important to you, we recommend checking out Vivint or even the new ADT Pulse systems.

Next, you'll connect SimpliSafe to your local Wi-Fi network and choose a 4-digit primary PIN (arrive memorable!). So far, so easy.

SimpliSafe Wireless Keypad Menu

Mounting the Sensors

With your base of operations station hub plugged in and the keypad set to become, all that's left to do is install the individual sensors.

You'll mount the door/window sensors using the included adhesive strips. An alternative is to use Velcro strips, which is a method we're big fans of. This little-known underground allows you to easily pop off the sensors from your door frames, which is bully for changing batteries and moving the system to a dissimilar address.

Did You lot Know: Like about DIY security systems, SimpliSafe offers all kinds of installation support. There's an online help eye, troubleshooting guide, owner's manuals, user forums, and live client service every day from 8 am to midnight EST. Their live client support hours are some of the best we've seen in the manufacture.

When mounting the little magnetic sensors, you'll want to be sure to proceed the magnet inside two inches of the sensor, otherwise it won't work. Don't worry, you'll see a little blue light glimmer on the sensor when it's working correctly. Ane quick tip that volition save you some time is to have the wireless keypad with you as you go from room to room mounting the sensors. This fashion you lot can name each sensor every bit you go.

That's all there is to information technology! You should fix aside about twenty-30 minutes to complete the installation. We plant information technology to exist super-intuitive and actually sort of enjoyable.

How Easy Is It?

Now, we know that context is everything. That is, we might say something is "easy," just your "piece of cake" might be way different than ours. With this in heed, we made the nautical chart below that shows SimpliSafe installation side-past-side with other top DIY habitation security systems. This should put it in perspective for you.

DIY Warning System Installation

	Price Range	Installation Difficulty	SecureScore: Ease of Use
SimpliSafe	$183+	Very Easy	ix.7
Ring Alarm	$199+	Easy	7.9
Abode	$199+	Easy	8.0
Frontpoint	$430+	Piece of cake/Moderate	7.8
Brinks	$199+	Easy/Moderate	7.7
Alder Security	North/A	Moderate	7.6

SimpliSafe Installation At-A-Glance

We think the best way to learn how to set SimpliSafe is by going along for the ride with usa. That's why we shared our full feel higher up. But we think yous'll like this adjacent section if yous just desire a handy at-a-glance guide for a little boost of confidence. It shows you exactly what you tin expect with each individual SimpliSafe component.

SimpliSafe Base of operations Station

Toll: $114.99 when purchased separately
Requirements: Wi-Fi network, AC power
Wired or Wireless: Wired (power cord)
Tools Needed: No tools needed
Setup Time: Less than a minute
Online Installation Guide: Yes
In-App Instructions: Yes

Base Station Stride-Past-Stride Installation Instructions

Place your Base of operations Station in a centrally located area of your home.
Plug it into a power outlet that is non controlled by a light switch using the included ability string.
The Base Station'southward LED light will glow with a soft blueish when information technology is armed, and the light turns off when the arrangement is disarmed. Note that this is the exact opposite of Ring Alert. So if you're a former Ring Alert user, blue means "armed" not "disarmed."

SimpliSafe Keypad

Toll: $69.99 each
Wired or Wireless: Wireless
Tools Needed: No tools needed
Setup Time: Less than a minute
Online Installation Guide: Yes
In-App Instructions: Aye

Keypad Step-Past-Step Installation Instructions

Follow the onscreen instructions for setting upward the Main Pin.
Remove the blanket of the pare-and-stick adhesive on back of the Keypad.
Mount the Keypad to a wall (we put ours about our master entrance). Y'all'll withal exist able to slide it in and out of the mounting bracket. Annotation that you don't take to mount the keypad, you tin place information technology on a table or counter.
Press down on the side of the screen to navigate the Keypad menus. This felt foreign at kickoff, but nosotros got used to it pretty chop-chop.
Install and name your sensors with the Keypad by doing the post-obit:
Press the 'Test' button on a sensor to test and name it. When the Keypad prompts you, you can then remove the battery tab on the device/sensor yous want to install.

FYI: The SimpliSafe keypad might take some getting used to. You lot'll press the sides of the screen to toggle from window to window. It's a new blueprint that nosotros haven't seen before. But honestly, information technology'south growing on u.s..

SimpliSafe Motion Sensors

SimpliSafe - Motion Sensor

SimpliSafe – Movement Sensor

Toll: $29.99 each
Wired or Wireless: Wireless
Tools Needed: No tools needed
Setup Fourth dimension: 2 minutes
Online Installation Guide: Yes
In-App Instructions: Yes

Move Sensor Step-By-Step Installation Instructions

Place on a shelf or adhere to your wall nigh four-five feet off the ground with the 'Test' button facing upwards. It should be mounted about the elevation of your light switches.
Be sure not to identify the sensor near a heater, air conditioner, lamp, or whatever other electronics including your Wi-Fi router.
If you have a canis familiaris over thirty pounds, install the motion sensor push-side downward about 4 anxiety off the ground.
If yous're a cat person, identify the motion sensor where your true cat cannot climb near it and with the button-side up nearly vi-10 anxiety off the ground.

SimpliSafe Entry Sensors

Cost: $fourteen.99 each
Wired or Wireless: Wireless
Tools Needed: No tools needed
Setup Time: v-10 minutes
Online Installation Guide: Yes
In-App Instructions: Yes

Entry Sensor Stride-By-Step Installation Instructions

Line up the magnet and sensor on your door or window and then the grooves align and both pieces are less than 2 inches apart when the window/door is closed.
Test alignment earlier adhering each piece using the included adhesive. The blue lite should flash one time when a door/window opens and twice when it's closed.
Mount the sensor on your door and the smaller magnet on the doorframe, or vice versa.

Did You Know: With the exception of Dwelling, SimpliSafe's door/window sensors are the smallest sensors nosotros've seen in the industry. This is important to us, equally we desire our security system to blend in with our habitation'south decor, not stick out like a sore thumb.

SimpliSafe Water/Flood Sensors

Cost: $19.99 each
Wired or Wireless: Wireless
Tools Needed: No tools needed
Setup Time: Less than a infinitesimal
Online Installation Guide: Yes
In-App Instructions: No

Water/Flood Sensor Step-Past-Pace Installation Instructions

Place your SimpliSafe water/inundation sensor(southward) on the floor, in the baste pan of your water heater, behind your washing machine, or about your bathroom or kitchen plumbing to detect overflows or broken pipes.
You tin use the provided adhesive tabs if yous'd similar, only be certain not to cover whatsoever of the six metal contact points on the bottom of the sensor.

SimpliSafe SimpliCam Photographic camera

SimpliSafe - Indoor camera

SimpliSafe SimpliCam

Price: $99 each
Requirements: Wi-Fi connection, AC power. Note that this device doesn't employ a cellular signal, so if your cyberspace goes out, your cameras won't piece of work.
Wired or Wireless: Wired (power string)
Tools Needed: No tools required
Setup Time: 5-10 minutes
Online Installation Guide: Aye
In-App Instructions: Yep

SimpliCam Step-Past-Stride Installation Instructions

Open the box.
Slide photographic camera off of the stand up.
Insert Micro-USB into the port on the back of the photographic camera.
Supplant the camera stand.
Plug the string into your power outlet.
Use the SimpliSafe app to begin the installation.

SimpliSafe Video Doorbell Pro

SimpliSafe - Video Doorbell

SimpliSafe – Video Doorbell

Cost: $169 each
Requirements: Wi-Fi connexion (ii.4Ghz), existing doorbell setup (8V to 24V) with an analog (mechanical) door chime
Wired or Wireless: Wired video doorbell that must supercede an existing doorbell. In that location is no battery option available.
Tools Needed: Phillips head screwdriver
Setup Fourth dimension: 30 minutes on average for most people
Online Installation Guide: Yes
In-App Instructions: No

Video Doorbell Pro Step-By-Pace Installation Instructions

Turn off your power at breakers.
Remove your old doorbell.
Pull existing doorbell wires through the mounting subclass.
Screw mounting bracket to the wall.
Attach wires to the mounting bracket.
Mount doorbell into place.
Turn your power back on.

SimpliSafe Installation Help & Tips

Setting Up the Wi-Fi

As you'll remember, y'all'll connect the hub to your Wi-Fi at the outset of the installation process; it's a quick and intuitive connection. To prepare the Wi-Fi, press the 'Menu' push on your keypad. Next, enter your Master Pin, and so navigate to 'System Settings', then select 'Wi-Fi' and continue setting up your Wi-Fi like you would any other wireless device.

FYI: Annotation that while SimpliSafe is powered by Wi-Fi, it also has cellular backup in case your power cuts out or your Wi-Fi lags. Although Wi-Fi isn't every bit fast or reliable as cellular systems similar Vivint or Frontpoint, we still retrieve it'south a solid connexion. In our experience, nosotros didn't take any connection issues during testing.

Installation Videos

You lot'll find a few helpful videos on the SimpliSafe website. We watched the 'Install Core Devices' videos and we institute them to exist well-made and to-the-point. You'll also find plenty of third-party installation videos online; merely the truth is, y'all really won't demand them since the system is and then uncomplicated to install.

Installation Manual

SimpliSafe besides offers an online Installation Transmission with complete installation instructions for each of the components, also as instructions on how to use everything once yous're up-and-running. This manual is quite detailed and offers more than than enough information to install your system apace and easily. This is overnice, simply we've found that nearly companies have online manuals these days.

Tools Required

Most SimpliSafe products can be installed with adhesive tabs, which are included in the box. Just exist sure you take a Phillips caput screwdriver handy if you order SimpliSafe's doorbell photographic camera, the Video Doorbell Pro. Don't worry, if you're not handy around the house, SimpliSafe offers a professional person installation service too (see below). Nosotros're seeing this more and more with DIY brands. Sure, it's easy to do-it-yourself… just it'south even easier to have someone else exercise it!

Professional Installation Service

SimpliSafe has certified technicians who will come to your home and prepare up your entire system in less than an hr for simply $79.00. This is a great culling to rolling up your sleeves. But and so once more, there's something to exist said about installing a new organization all past yourself. Either style, you have options.

Concluding Thoughts on SimpliSafe Installation

As you'll see in our full SimpliSafe review, we rated this DIY home security system a 9.7 in the ease-of-use category, which includes setup and installation. That's the highest rating nosotros've ever given a product, and SimpliSafe earned it. Of course, SimpliSafe isn't the almost advanced system out there — it lacks certain features similar a touchscreen keypad, extensive home automation integrations, and an outdoor camera. Merely and then over again, this means there's less engineering science to trip you up.

Overall, we were quite impressed with SimpliSafe in the DIY installation department. It took almost 20-xxx minutes for united states to install our system, from start to end. And nosotros appreciate that the visitor is (most) always around for phone back up in case you striking a roadblock. The bottom line is that SimpliSafe is a great value if you're looking for an affordable, user-friendly system that sets upwardly in a jiffy and offers bones-to-intermediate dwelling protection.

Source: https://www.safehome.org/security-systems/simplisafe/installation/

Posted by: thompsonpencier.blogspot.com